견적문의

NEUCHATEL, SWITZERLAND--( / )--Masimo (NASDAQ: MASI) today announced the findings of an abstract recently presented at ANESTHESIOLOGY® 2020, the Annual Meeting of the American Society of Anesthesiologists (ASA). In this independent, retrospective study, researchers investigated whether Masimo ORi™ (Oxygen Reserve Index) could predict whether children with obstructive sleep apnea syndrome (OSAS) undergoing tonsillectomy required postoperative oxygen therapy.

ORi, available outside the U.S., is a noninvasive and continuous parameter intended to provide insight into a patient’s oxygen status during moderate hyperoxia. Enabled by the multi-wavelength rainbow® Pulse CO-Oximetry platform, ORi is provided alongside oxygen saturation (SpO2), a clinically proven Masimo SET® pulse oximetry measurement.

Dr. Yoshimi Inagaki and colleagues at Tottori University in Yonago, Japan sought to determine whether Masimo ORi could serve as a useful predictor of the need for postoperative oxygen therapy (POT). They enrolled 45 pediatric patients with OSAS, ranging from 7 to 120 months, who were anesthetized with sevoflurane and monitored with ORi while undergoing tonsillectomy.

Of the 45 patients, 16 required POT. For those 16, the mean lowest ORi and SpO2 values were 0.28 and 93%, respectively. For the remaining patients, who did not receive POT, the mean lowest values were 0.64 and 97%, respectively. The researchers calculated sensitivity and specificity for ORi predicting when POT would not be needed of 0.815 (95% confidence interval 0.5435 - 0.9595) and 0.9310 (95% confidence interval 0.7723 - 0.9915), respectively.

The researchers concluded that ORi is “likely to become an index of POT in pediatric patients with OSAS.” They also noted, “In children with OSAS, [the] requirement of POT following tonsillectomy and adenoidectomy is probably able to be predicted on the basis of the results of this retrospective cohort study.”

ORi has not received FDA 510(k) clearance and is not available for sale in the United States.

@Masimo | #Masimo

About Masimo

Masimo (NASDAQ: MASI) is a global medical technology company that develops and produces a wide array of industry-leading monitoring technologies, including innovative measurements, sensors, patient monitors, and automation and connectivity solutions. Our mission is to improve patient outcomes and reduce the cost of care. Masimo SET® Measure-through Motion and Low Perfusion™ pulse oximetry, introduced in 1995, has been shown in over 100 independent and objective studies to outperform other pulse oximetry technologies.[2] Masimo SET® has also been shown to help clinicians reduce severe retinopathy of prematurity in neonates,[3] improve CCHD screening in newborns,[4] and, when used for continuous monitoring with Masimo Patient SafetyNet™ in post-surgical wards, reduce rapid response team activations, ICU transfers, and costs.[5-8] Masimo SET® is estimated to be used on more than 200 million patients in leading hospitals and other healthcare settings around the world,[9] and is the primary pulse oximetry at 9 of the top 10 hospitals according to the 2020-21 U.S. News and World Report Best Hospitals Honor Roll.[10] Masimo continues to refine SET® and in 2018, announced that SpO2 accuracy on RD SET® sensors during conditions of motion has been significantly improved, providing clinicians with even greater confidence that the SpO2 values they rely on accurately reflect a patient’s physiological status. In 2005, Masimo introduced rainbow® Pulse CO-Oximetry technology, allowing noninvasive and continuous monitoring of blood constituents that previously could only be measured invasively, including total hemoglobin (SpHb®), oxygen content (SpOC™), carboxyhemoglobin (SpCO®), methemoglobin (SpMet®), Pleth Variability Index (PVi®), RPVi™ (rainbow® PVi), and Oxygen Reserve Index (ORi™). In 2013, Masimo introduced the Root® Patient Monitoring and Connectivity Platform, built from the ground up to be as flexible and expandable as possible to facilitate the addition of other Masimo and third-party monitoring technologies; key Masimo additions include Next Generation SedLine® Brain Function Monitoring, O3® Regional Oximetry, and ISA™ Capnography with NomoLine® sampling lines. Masimo’s family of continuous and spot-check monitoring Pulse CO-Oximeters® includes devices designed for use in a variety of clinical and non-clinical scenarios, including tetherless, wearable technology, such as Radius-7® and Radius PPG™, portable devices like Rad-67™, fingertip pulse oximeters like MightySat® Rx, and devices available for use both in the hospital and at home, such as Rad-97®. Masimo hospital automation and connectivity solutions are centered around the Masimo Hospital Automation™ platform, and include Iris Gateway®, Patient SafetyNet, Replica™, Halo ION™, UniView™, UniView: 60™, and Masimo SafetyNet™. Additional information about Masimo and its products may be found at Published clinical studies on Masimo products can be found at

ORi and RPVi have not received FDA 510(k) clearance and are not available for sale in the United States. The use of the trademark Patient SafetyNet is under license from University HealthSystem Consortium.

References

[1] Inagaki Y, Kitagawa Y, Otsuki A. Oxygen Reserve Index Predicts Postoperative Oxygen Requirement after Tonsillectomy in Children with Obstructive Sleep Apnea Syndrome. Proceedings from the ASA 2020 Annual Meeting. Abstract #A4091. Accessed 10/8/20 at

[2] Published clinical studies on pulse oximetry and the benefits of Masimo SET® can be found on our website at Comparative studies include independent and objective studies which are comprised of abstracts presented at scientific meetings and peer-reviewed journal articles.

[3] Castillo A et al. Prevention of Retinopathy of Prematurity in Preterm Infants through Changes in Clinical Practice and SpO2 Technology. Acta Paediatr. 2011 Feb;100(2):188-92.

[4] de-Wahl Granelli A et al. Impact of pulse oximetry screening on the detection of duct dependent congenital heart disease: a Swedish prospective screening study in 39,821 newborns. BMJ. 2009;Jan 8;338.

[5] Taenzer A et al. Impact of pulse oximetry surveillance on rescue events and intensive care unit transfers: a before-and-after concurrence study. Anesthesiology. 2010:112(2):282-287.

[6] Taenzer A et al. Postoperative Monitoring - The Dartmouth Experience. Anesthesia Patient Safety Foundation Newsletter. Spring-Summer 2012.

[7] McGrath S et al. Surveillance Monitoring Management for General Care Units: Strategy, Design, and Implementation. The Joint Commission Journal on Quality and Patient Safety. 2016 Jul;42(7):293-302.

[8] McGrath S et al. Inpatient Respiratory Arrest Associated With Sedative and Analgesic Medications: Impact of Continuous Monitoring on Patient Mortality and Severe Morbidity. J Patient Saf. 2020 14 Mar. DOI: 10.1097/PTS.0000000000000696.

[9] Estimate: Masimo data on file.

[10]

Forward-Looking Statements

This press release includes forward-looking statements as defined in Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934, in connection with the Private Securities Litigation Reform Act of 1995. These forward-looking statements include, among others, statements regarding the potential effectiveness of Masimo ORi™. These forward-looking statements are based on current expectations about future events affecting us and are subject to risks and uncertainties, all of which are difficult to predict and many of which are beyond our control and could cause our actual results to differ materially and adversely from those expressed in our forward-looking statements as a result of various risk factors, including, but not limited to: risks related to our assumptions regarding the repeatability of clinical results; risks related to our belief that Masimo‘s unique noninvasive measurement technologies, including Masimo ORi, contribute to positive clinical outcomes and patient safety; risks related to our belief that Masimo noninvasive medical breakthroughs provide cost-effective solutions and unique advantages; risks related to COVID-19; as well as other factors discussed in the “Risk Factors” section of our most recent reports filed with the Securities and Exchange Commission (“SEC”), which may be obtained for free at the SEC’s website at Although we believe that the expectations reflected in our forward-looking statements are reasonable, we do not know whether our expectations will prove correct. All forward-looking statements included in this press release are expressly qualified in their entirety by the foregoing cautionary statements. You are cautioned not to place undue reliance on these forward-looking statements, which speak only as of today's date. We do not undertake any obligation to update, amend or clarify these statements or the “Risk Factors” contained in our most recent reports filed with the SEC, whether as a result of new information, future events or otherwise, except as may be required under the applicable securities laws.

View source version on businesswire.com:Researchers Use Masimo ORi™, Oxygen Reserve Index, to Predict the Need for Postoperative Oxygen Therapy in Pediatric Patients with Obstructive Sleep Apnea

HOLLYWOOD, FLA.--( / )--Sintavia, LLC, a designer and additive manufacturer of critical thermal components for the Aerospace, Defense, & Space industry, announced today that it had acquired two M4K-4 printers from AMCM GmbH of Starnberg, Germany. Each of the 사천면포커 스포츠토토승부식 two new M4K-4s, which are stretched versions of the commercially 소노다미온 HOLLYWOOD,EOS M400-4 printer, uses four 1kW lasers to 스포츠중계바셀TV 휴대폰사진다운 print single-unit components with dimensions of 450mm x 450mm x 1m. As one of the largest rocket printers in North America, Sintavia will use the new machines to expand its portfolio of thrust chamber design and manufacturing for the rapidly growing commercial space industry.

“Since the acquisition of our first M400-4 three years ago, Sintavia has devoted tremendous resources to developing successful and repeatable operating procedures for the quad laser printing of extremely thin walls, such as those found in the thrust chamber of 스포츠중계바셀TV 네임드사다리게임 a rocket,” said Brian Neff, Sintavia’s Chief Executive Officer. “We now have eight M400-4 quad 스포츠중계바셀TV laser printers, and we expect that the successful strategies employed on the M400-4 will likewise work on these new M4K-4 units. We are pleased that we will be the first 스포츠중계바셀TV 사이퍼즈 rocket printer in North America to offer the expanded footprint of the 사천면포커 장기 M4K-4 to our commercial space customers.”

Developed by AMCM, an affiliated 스포츠중계바셀TV 광학식뷰파인더 company of EOS GmbH, the M4K-4 is 스포츠중계바셀TV 넷츠코 a stretched and widened version of the EOS M400-4 printer, 사천면포커 서울대공원 with more powerful lasers and an upgraded cooling system. The design of the M4K-4 was driven largely by demand from commercial space launch customers who were looking to optimize thrust chamber assemblies with fewer traditional joining steps. For most existing commercial rocketry currently in production today, the M4K-4 is able to manufacture the entire thrust chamber assembly as a single unit, including optimized regenerative cooling passages, thereby dramatically reducing manufacturing complexity and time. The two new printers will 스포츠중계바셀TV be delivered in June and July of 2021, and will be installed in high performance copper and 넷마블포커 Developedalloys.

About 스포츠중계바셀TV 경범죄처벌법시행령개정안 Sintavia 사천면포커 나인바카라

Sintavia designs and 3D prints 사천면포커 경범죄처벌법시행령 a new generation of flight and launch products for the Aerospace, Defense & Space industry. The company's ability to design and 스포츠중계바셀TV 정통카지노 serially produce thermally engineered components with complex structural walls of less than 150 microns has unlocked a level of performance impossible to achieve using traditional manufacturing methods. 스포츠중계바셀TV 김형규 With 26 high-speed printers co-located alongside 스포츠중계바셀TV 곽현화딜 precision post processing equipment, a full complement of mechanical testing equipment, and a full metallurgical and powder laboratory, Sintavia is able to optimize parameters, serially manufacture, and audit quality parts for aerospace applications. A founding member of the Additive Manufacturer Green Trade Association, Sintavia is committed to the highest quality standards in the industry and holds multiple Nadcap and other aerospace accreditations.

For IP우회 For스포츠중계바셀TV 우리카지노추천 information, 스포츠중계바셀TV visit 스포츠중계바셀TV 정선카지노주소

View 스포츠중계바셀TV source version 스포츠중계바셀TV 정선카지노추천 on businesswire.com:Sintavia Expands Rocket Manufacturing 사천면포커 강원랜드바카라추천 Capability with Two M4K-4 Printers from AMCM GmbH